Do you Know about fillet..?
Filleting connect two objects with ease for a certain radius.
An angle is called the fillet and the outer corner is called a round;
We can make inside and outside fillet fillet fillet use in AutoCAD.
We can do the fillets on the object:
-Arc
-Circle
-Ellipse
-arc
-Line
-Polylines
-Splines
-Xlines
An angle is called the fillet and the outer corner is called a round;
We can make inside and outside fillet fillet fillet use in AutoCAD.
We can do the fillets on the object:
-Arc
-Circle
-Ellipse
-arc
-Line
-Polylines
-Splines
-Xlines
Fillet Using an easy method for creating an arc
with a certain radius that is tangent to two objects selected.
Fillets can be used to collect all the angles
the polyline using a single command.
If the two objects in the fillets are on the same layer,
the fillet arc is at the same layer.
If you are on layers of different, will affect
layer object properties including color and linetype.
Set the Radius Fillet
fillet radius is the radius of the arc that connects the object fillets.
If we set the fillet radius with the number 0, the object is trimmed filleted
or extended until they meet (sharp), there is no radius are made.
Trim and Extend Objects Filleted Filleted Object Trim and Extend
We can use the Trim option to determine whether
The selected objects are trimmed or extended to the endpoints of the arc.
By default, all objects except the circle, filled ellipse, closed polylines,
and splines can be in the fillet (trimmed or expanded).
Depending on the location we specify,
more than one fillet can be made between the selected object.
